Hell-bent-steel 1996-2004 Toyota Tacoma 2WD / 4WD 2.5 Leveling Kit Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Hell-bent-steel 1996-2004 Toyota Tacoma 2WD / 4WD 2.5 Leveling Kit. Hell Bent Steel 1996-2004 Toyota Tacoma 2WD / 4WD 2.5 Leveling Kit User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
HELL BENT STEEL, INC - INSTALLATION INSTRUCTIONS - www.hellbentsteel.com
2” and 2.5” FRONT LEVELING SYSTEM FOR THE 6-LUG SUSPENSION
TOYOTA TACOMA 1996-2004 - PN:410-200-001 & 410-250-001
IMPORTANT NOTES:
Please read before beginning installation. OEM Manual should be
used as a reference.
410-000-1001
01/09
It is highly recommended that a certified mechanic perform this
installation.
Read and understand all the instructions before beginning
installation.
Use Locktite® on all bolts associated with this installation.
Torque Specifications (ft-lbs):
Strut Mount/Assembly Upper Nuts (3 nuts) …….….………….. 47
Shock Absorber-to-Lower Control Arm Nut/Bolt …………… 101
Lower Ball Joint Mounting bolt ………………………………...43
Sway Bar-to-Upper Link Nut..…………………..…..…………. 22
Sway Bar-to-Lower Link Nut..………………..……..…………. 51
Sway Bar Bushing Bracket Bolt ………………………..……….19
Tie Rod End-to-Steering Knuckle ballstud nut …………….….. 53
Strut Bar-to-Frame nut/bolt …………………………………….221
Strut Bar-to Lower Control Arm ……………………………… 111
Wheel Lug Nuts …………………………………………………83
*If you desire to return the vehicle to stock, make sure to save
all the stock components.
WARNING: IT IS HIGHLY RECOMMENDED
THAT A CERTIFIED MECHANIC PERFORM
THIS INSTALLATION.
IMPORTANT CUSTOMER INFORMATION:
This vehicle’s reaction and handling characteristics may differ from
that of standard cars and/or trucks. Modifications to improve off
road performance may raise the vehicle’s intended center of gravity.
Extreme caution must be utilized when encountering driving
conditions that may cause vehicle imbalance or loss of control.
DRIVE SAFELY! Avoid abrupt maneuvers, such as sharp turns,
hich could cause a roll over, resulting in serious injury or death. w
It is the customer’s responsibility to make sure a re-torque is
performed on all hardware associated with this suspension system
after the first 100 miles. It is also the customer’s responsibility to do
a complete re-torque after every 1000 miles or after every off road
se. u
After the original installation, it is recommended to have the
alignment checked by a certified alignment technician that is
experienced with lifted vehicles. Also the alignment should be
checked every 6 months to ensure proper tracking, proper wear on
tires and front-end components. The responsibility for abuse,
improper installation, or improper suspension maintenance is solely
that of the customer.
NOTICE:
It is the responsibility of the customer or the mechanic to wear safety
glasses at all times when working with air tools.
Please follow all the instructions carefully.
Before installation begins, drive the vehicle and inspect it to make sure
that there are not any uncommon sounds or frame damage.
Front End Installation:
1. To begin
installation, block the
rear tires of the
vehicle so that the
vehicle is stable and
can’t roll backwards.
Safely lift the front of
the vehicle and
support the frame
with jack stands.
Place jack stands on
both the driver and
the passenger sides of
the vehicle. Next
remove the wheels
from both sides.
3. Next remove the strut’s lower mounting bolt with a 19 mm
socket and wrench.
NOTE: Once the nut is removed, it may be necessary to use a
punch and hammer to free the bolt.
Vue de la page 0
1 2

Résumé du contenu

Page 1

HELL BENT STEEL, INC - INSTALLATION INSTRUCTIONS - www.hellbentsteel.com 2” and 2.5” FRONT LEVELING SYSTEM FOR THE 6-LUG SUSPENSION TOYOTA TACOMA 199

Page 2

4. Remove the nuts from the three upper strut mounting bolts with a 14 mm ratchet. Be sure to support the strut assembly as the nuts are removed to

Commentaires sur ces manuels

Pas de commentaire